Rocktron Pulse Tremolo and Vibe Pedal

While the tremolo is a staple effect in most guitarists? arsenal, you haven?t seen anything yet quite like the Rocktron Pulse Tremolo where the effect is created using modulated and static light! The Pulse provides a very economical way to get that expensive classic ?tube tremolo? sound in a small box. While typical tremolo devices are created electrically using VCAs, the Pulse is created with light, using light for creating signal modulation via a photo-resistor ? an LED lights up and the photo-resistor changes the output volume on the Pulse in relationship to the light intensity. An LFO (low frequency oscillator) pulses the LED at a given rate and a given wave form. The light travels to the photo-resistor causing it to change resistance value, which in turn changes the gain output of the internal amplifier (op amp). If all this sounds very technical, what you really need to know is that the result is a smooth non-symmetrical tremolo which closely approximates classic tube tremolo properties. A Speed control varies the rate of the tremolo, while an Intensity control determines the amount of the effect. A switch is provided that lets you choose triangle or square LFO pulse modulation waveforms. A large blue LED shows the speed of the tremolo.Tremolo pedals usually sound better when placed after distortion in the signal chain. However, the Pulse can be used either before or after the distortion. When you put the Pulse before your distortion you will get a very cool...